ROTO START BACK PLATE 14MM HEX UNIT (F/G SERIES)
FITS F AND G SERIES ENGINES/USE WITH 107829 ONE WAY 14MM HEX

FRONT BEARING 7X19X6MM
Genuine HPI quality spare part for easy maintenance and repairs. See below for compatibility.

SHAPED EXHAUST GASKET (BLACK/2PCS)
These Shaped Exhaust Gaskets are genuine factory parts for HPI Savage X trucks. They are stock replacement parts for the Savage X4.6 and can be used on all Savage X engines if you're looking for a black gasket instead of the stock purple gasket. Sold in packs of 2.

CRANKCASE F3.5 INCLUDING CRANK BEARINGS (BLACK)
NITRO STAR F3.5

Roto-Start Back Plate (Bullet 3.0)
Optional Roto Start backplate for the stock Bullet G3.0 engine, for replacing the pull-start. Use with any Roto Start or Roto Start 2 system. Please note: To fit this roto-start onto a G3.0 HO engine (WR8), you must also change the one-way bearing to: #1430 - ONE WAY BEARING FOR PULLSTART

12T Clutch Bell
Change the gearing of your Bullet MT or ST for increase performance! With a smaller clutchbell, you get increased acceleration off the starting line or out of a turn; with a larger clutchbell you'll get increased top speed! It's your choice and they're easy to fit! Please note: Requires 5x8x4mm bearings

Exhaust Gaskets
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Flywheel
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Tuned Pipe Set
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Air Filter Set
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Exhaust Header Set
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Dust Protection and o-ring complete Set
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Throttle slide drum
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Mid Range Needle Valve with o-rings
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Idle Adjustment screw and throttle guide screw set
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Slide carburetor with two o-rings
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

GASKET FOR CYLINDER (0.2MM/F3.5)
F3.5 Engine

SCREW M2.6x6mm for COVER PLATE (8pcs)
for COVER PLATE AND PULLSTART / NITRO STAR S-25 / F series

PULLSTART ASSEMBLY (WITHOUT ONE WAY BEARING)
NITRO STAR S-25 / F SERIES

ONE WAY BEARING FOR PULLSTART
NITRO STAR G3.0 / S-25 / F SERIES

WASHER SET FOR FUEL LINE FITTING
NITRO STAR T-15 / T3.0 / G3.0 / S-25 / F series

FUEL LINE FITTING/WASHER SET
NITRO STAR T-15 / T3.0 / G3.0 / S-25 / F SERIES

UNIBALL
NITRO STAR S-25 / F SERIES

GLOW PLUG COLD R5 FOR SUMMER / HOT CONDITIONS
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.